Siemens SIMOCODE pro System Manual page 103

Resetting, testing and parameterizing via commands
The "Commands" menu item contains all commands relating to
SIMOCODE pro e.g. for testing the feeder, resetting after tripping and/or
adopting parameters into the memory module or into SIMOCODE pro. By
safeguarding the device-internal parameterization against external access,
e.g. via a password stipulated in SIMOCODE pro, individual commands and/
or even the entire "Commands" menu item can be blocked.
Test/Reset
Adopt address
Program
Clear
Read
Restart
Factory settings
Table 1-17: Resetting, testing and parameterizing via commands
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Only if the Test/Reset button has not been blocked.
Only if the Test/Reset button has not been blocked and a password
has not been stipulated.
Only if the Test/Reset button has not been blocked.
Always possible.
Only if the Test/Reset button has not been blocked and a password
has not been stipulated.
Only if the Test/Reset button has not been blocked.
Only if the Test/Reset button has not been blocked.
System description
1-85