Analog Value Recording - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

Analog value recording

In this chapter

This chapter provides information regarding the possibility of recording the

measured curves of different measured values, e.g. the motor current when

the motor is started, using SIMOCODE pro V.

The increasing wear on the motor and the equipment driven by the motor all

cause the motor current to change over time. By recording the motor

current at different points in time and making direct comparisons,

conclusions can be drawn regarding the condition of the motor and the

Target groups

This chapter is addressed to the following target groups:

• Configurators

• Programmers

• Commissioners

• Service personnel.

Necessary knowledge

You will require the following knowledge:

• SIMOCODE pro

• Motor protection, motor control

• The principle of connecting plugs to sockets

• Knowledge of electrical drive engineering.

Navigation in SIMOCODE ES

You will find the dialogs in SIMOCODE ES under:

Device parameters > Analog value recording.

SIMOCODE pro

GWA 4NEB 631 6050-22 DS 03