Siemens SIMOCODE pro System Manual page 84

System description
Safety
Safety DM-F Local
DIP switches, DM-F Local
Safety DM-F PROFIsafe
Table 1-12: Motor protection and motor control status (Cont.)
1-66
Enabling circuit status, switch-off "Safety", "Safety OK."
Note
This is only displayed if the OPD version is above *E04* and if the
BU2 is above version *E07* with a DM-F Local present.
Status of DIP switch 1, 2, 3, 4, 5, 6, 7, 8.
Note
This is only displayed if the OPD version is above *E04* and if the
BU2 is above version *E07* with a DM-F Local present.
Enabling circuit status, switch-off "Safety", PROFIsafe active
Note
This is only displayed if the OPD version is above *E04* and if the
BU 2 is above version *E07* with a DM-F PROFIsafe present.
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03