Accessories - Siemens SIMOCODE pro System Manual

1.7.9

Accessories

The following figure shows accessories that are independent of the device
series:
System interface
cover
Memory module
Fig. 1-40: Accessories
PC cable
For device parameterization, for connecting a PC to the system interface of
a basic unit via the serial interface of the PC.
USB to serial adapter
For connecting a RS-232 cable to the USB interface of a PC.
Memory module
Allows system parameterization to be backed up completely and be
transferred to a new system without additional resources or specialist
expertise, for example if the device is replaced (see
Addressing plug
For the hardware-related allocation of the PROFIBUS DP address to
SIMOCODE pro without a PC/PD via the system interface.
Setting the PROFIBUS DP address with an addressing plug:
See Chapter
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
PC cable USB to serial adapter
Door adapter
Connecting cable
14.2.2.
System description
Addressing plug
Adapter for
Operator panel
Chapter 14.3.3)
1-107