Siemens SIMOCODE pro System Manual page 93

Displays the current status of all device I/Os
The "Device I/Os" menu item gives a complete overview of the current
status of all inputs and outputs of the basic unit and any connected
expansion modules (except for the earth-fault module) The type of status
information displayed is, therefore, directly dependent upon the
SIMOCODE pro hardware configuration.
Here are the most important menus:
Basic unit
Inputs 1, 2, 3, 4
Outputs 1, 2, 3
PTC high resistance/not present
PTC ok, PTC short circuit
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
System description
1-75