Siemens SIMOCODE pro System Manual page 409

Operator panel with display
Cutout
Fig. 13-5: Mounting the operator panel with display
Warning
To ensure IP54 tightness and the correct functionality of the operator panel,
the tightening torque of the screws provided must not be set too high when
mounting and the seal provided must be applied.
Note
Only a connecting cable is required for connecting the operator panel with
display to SIMOCODE pro (see
components"). Additional wiring for the power supply or ground is not
required.
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
+0.5
91.5
Front panel
switchgear cabinet door
etc.
Chapter 1.6 "Overview of system
Mounting, wiring, interfaces
Mounting bracket
4 x 0.15 + 0.05 Nm
13-9