Siemens SIMOCODE pro System Manual page 17

Further information
• Please read the operating instructions of the respective components.
You can find the operating instructions for SIMOCODE pro at:
www.siemens.com/industrial-controls/manuals.
• In addition to this system manual, you will need the following manuals:
– "Failsafe Digital Modules SIMOCODE pro SAFETY" manual
– The appropriate manual for the DP master
You will find further information on the Internet:
• Internet:
www.siemens.com/simocode
• Information and Download Center:
www.siemens.com/industrial-controls/infomaterial
• Product Information System (ProdIS):
www.siemens.com/industrial-controls/support
• ATEX:
www.siemens.com/industrial-controls/atex.
• Certificates:
www.siemens.com/industrial-controls/approvals.
Further support (Service and Support)
Technical assistance:
Telephone:+49 (0) 911-895-5900 (8 a.m. - 5 p.m. CET)
Fax: +49 (0) 911-895-5907
E-mail:technical-assistance@siemens.com
Internet: www.siemens.com/industrial-controls/technical-assistance.
Correction sheet
A correction sheet is included at the end of this manual. Please use it to
enter suggestions for improvements, additions and corrections and send it
back to us. This will help us to improve the next edition.
Disclaimer of liability
The products described here have been developed to carry out safety-
oriented functions as part of a complete plant or machine. In general, a
complete safety system consists of sensors, evaluation units, signaling
devices and methods for safe tripping. The manufacturer is responsible for
ensuring safe functioning of the complete plant or machine.
Siemens AG, its subsidiaries and associated companies (herein referred to
as "Siemens") are not in a position to guarantee every characteristic of a
complete plant or machine not designed by Siemens.
Siemens also denies all responsibility for any recommendations that are
made or implied in the following description. No new guarantee, warranty or
liability above those standard to Siemens can be derived from the following
description.
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Important information
xiii