Introduction - Siemens SIMOCODE pro System Manual

Inputs
7.1

Introduction

Description
SIMOCODE pro has various inputs. These are represented by the different
function blocks in SIMOCODE pro. These function blocks are the ingoing
SIMOCODE pro interfaces. Within SIMOCODE pro, these inputs are
represented as sockets on the corresponding function blocks and can be
assigned via connections to any functions. Inputs can be:
• Input terminals
modules
• Buttons on the operator panel (one Test/Reset button, four freely-
parameterizable buttons), and basic units (one Test/Reset button)
• Temperature module inputs
• Analog module inputs
• Inputs from PROFIBUS DP (cyclic and acyclic).
Schematic
The following schematic shows a general representation of the input types:
Fig. 7-1: General representation of the input types
7-2
, located on the outside of the basic units and digital
SIMOCODE pro
Input terminals
SIMOCODE pro
Buttons
- Control commands
- Test/Reset
SIMOCODE pro
PROFIBUS DP DP
Input
Sockets
Input
Sockets
Input
Sockets
GWA 4NEB 631 6050-22 DS 03
SIMOCODE pro