Siemens SIMOCODE pro System Manual page 474

Alarms, faults and system events
Event Description
(alphabetical)
Wrong password SIMOCODE pro parameters are
protected by a password.
An attempt has been made to
change the parameters without
entering the password.
Table 15-1: Alarms, faults and system events (Cont.)
*) See "Error number" in
15-10
Troubleshooting
Please use the correct
password for changing
the parameters.
If you do not know the
password, new
parameters can only be
entered after the factory
settings have been
restored.
For a description of
factory settings, please
refer to Chapter 14.3.4
"Resetting the factory
settings".
Chapter B.6 "Data record 72 - Error buffer"
Acknowledg Contactor
ement/fault control
rectification
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Error
no.*)