Siemens SIMOCODE pro System Manual page 275

– Lamp test: All QL outputs are activated for approx. 2 s.
In most cases, the outputs of the basic unit will be connected to the QE or
QL outputs. By referring to
which QE outputs are required for which control functions.
Settings
BU Outputs
Outputs 1 to 3
Table 6-2: Basic unit output settings
Defaults depend on the selected application (template): See
"Example
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Table 4-21 on page 4-65
Control of the "BU Outputs" function block via any signal
(any sockets
e.g. device inputs, control bits from PROFIBUS DP , etc.
usually from the QE contactor controls)
circuits".
you can determine
Description
,
Outputs
Chapter E
6-5