Configuration Information For Using An Operator Panel With Display And/Or A Decoupling Module - Siemens SIMOCODE pro System Manual

System description
1.7.8 Configuration information for using an operator panel with display and/or
a decoupling module
If a decoupling module and/or an operator panel with display is to be used in
the SIMOCODE pro system, the following configuration information
regarding the type and number of expansion modules must be observed.
The following tables show the maximum expansion with expansion modules
for the various combinations
(x = possible, – = not possible):
Maximum expansion with expansion modules
I -
U/I -
U/I X
I -
U/I -
U/I X
1) No bistable relay outputs and a maximum of 5 of the 7 relay outputs are simultaneously
active (> 3 s)
2) No bistable relay outputs and a maximum of 3 of the 5 relay outputs are simultaneously
active (> 3 s)
3) Analog module output is not being used
Table 1-26: Maximum expansion with expansion modules when using an operator panel with display, a current/
voltage measuring module and a decoupling module for SIMOCODE pro V basic units with 24 V DC or
110-240 V AC/DC
1-106
SIMOCODE pro basic unit
U = 24 V DC
s
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
1) 1)
✓ ✓ ✓ ✓
Max. 4 modules
Max. 4 modules
✓ ✓ ✓
-
✓ ✓ ✓
-
SIMOCODE pro basic unit
U = 110-240 V AC/DC
s
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓
-
✓ 1) ✓ 1) ✓
✓ ✓
-
✓ ✓
-
Max. 4 modules
Max. 3 modules
✓
- -
✓ ✓ 2) ✓
-
✓ ✓ ✓
-
✓ 1) ✓ 1) ✓
✓
- -
GWA 4NEB 631 6050-22 DS 03
✓ ✓
✓ ✓
✓ ✓
✓
-
✓
-
✓
-
✓
-
✓ ✓
- -
3)
- -
✓ ✓
SIMOCODE pro