Siemens SIMOCODE pro System Manual page 677

Device data (GSD file)
Digital module (DM)
Digital modules DM-F Local and DM-F PROFIsafe
DIP switch
Door adapter
DP master
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Information on the input and output range, as well as the
consistency of the cyclically transmitted data is defined in the
device data file (GSD file), tested with the configuration
telegram from the device and, if appropriate, declared to be
valid. It is used for integrating the device into SIMATIC S7 or
any standard DP master system (automation system).
Digital modules offer the option of further increasing the
types and number of binary inputs and outputs on basic unit
2 as applicable.
A maximum of 2 digital modules can be connected to one
basic unit 2. All versions can be combined with each other.
SIMOCODE pro V can thus be extended to a maximum of
twelve binary inputs and seven binary outputs.
The failsafe digital modules DM-F Local and
DM-F PROFIsafe are used as safety relays in EMERGENCY
STOP mechanisms according to EN 418 and in safety circuits
according to EN 60204 (11.98):
Digital module DM-F Local:
For applications that require local safety-oriented tripping
with EMERGENCY OFF buttons.
Digital module DM-F PROFIsafe:
For applications that require decentralized, safety-oriented
tripping with EMERGENCY OFF buttons. A failsafe SIMATIC
controller adopts the logical connection between the
EMERGENCY OFF button and the failsafe digital module
PROFIsafe (DM-F PROFIsafe).
Small switch that allows basic settings to be carried out. DIP
stands for dual in-line package i.e. a design with two parallel
terminal rows.
The door adaptor is necessary for making the system
interface of a basic unit available at an easily accessible
location (e.g. front panel), thus enabling fast
parameterization.
A master which works with the DP protocol according to the
EN 50 170 standard, Volume 2, PROFIBUS.
Cyclic send data is exchanged between the DP master and
the DP slave once in every DP cycle. The DP master sends
the cyclic receive data to SIMOCODE pro. In response,
SIMOCODE pro sends the cyclic send data to the DP master.
Glossary
Glossary-5