Siemens SIMOCODE pro System Manual page 120

System description
Documentation for safety-oriented functions and failsafe digital
modules
Safety-oriented functions and additional information on failsafe digital
modules can be found in the following documentation:
Documentation
System manual "Failsafe Digital Modules SIMOCODE pro SAFETY " (German)
System manual "Failsafe Digital Modules SIMOCODE pro SAFETY" (English)
System manual "Failsafe Digital Modules SIMOCODE pro SAFETY" (French)
System manual "Failsafe Digital Modules SIMOCODE pro SAFETY" (Spanish)
Operating manual "Failsafe digital module DM-F Local"
Operating manual "Failsafe digital module DM-F PROFIsafe"
System manuals and operating manuals are available at:
www.siemens.com/industrial-controls/manuals.
The failsafe digital module DM-F Local provides safety-oriented tripping of
a motor feeder via a hardware signal that is detected and evaluated by the
module.
From a non-safety-oriented perspective, the DMF comprises:
4 digital inputs (non-safety-oriented):
- Input 1: Sensor circuit
- Input 2: Start input
- Input 3: Feedback circuit
- Input 4: Cascade input
Table 1-24: Inputs, outputs and voltage supply of the digital module
Failsafe Local (DM-F Local)
The failsafe digital module DM-F PROFIsafe provides safety-oriented
tripping of a motor feeder by a failsafe control (F-CPU) via PROFIBUS with
the failsafe PROFIsafe profile.
From a non-safety-oriented perspective, the DM-PROFIsafe comprises:
1-102
Inputs
24 V DC
1
Supply )
2 monostable relay outputs
inputs (non-safety-oriented)
GWA 4NEB 631 6050-22 DS 03
Outputs
SIMOCODE pro