Siemens SIMOCODE pro System Manual page 508

Data formats and data records
*) The "DP Diagn." column contains the bits which are additionally available
in the diagnostics using PROFIBUS DP:
• F: Fault
• M: Status information
• W: Warning
• F9, F16:Error types
See also Chapter
**) Event - PRM error number (bytes):
If parameterization is not possible, the number of the parameter group
(PRM group) which caused the error is transmitted here. You will find the
parameter groups in the parameter data records 130 to 133.
Byte.Bit
0.0
4.0
Fig. B-3: Example for parameter group
***) See "Error number" in Chapter
B-18
A.5 "Detailed messages of the slave
Designation
(PRM group)
Reserved
Device configuration
(see above)(12)
diagnostics".
Parameter group 12
B.6 "Data record 72 - Error
GWA 4NEB 631 6050-22 DS 03
buffer".
SIMOCODE pro