Simocode Pro With Thermistor Input - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

SIMOCODE pro with thermistor input

For the 3UF70, you can use type A temperature sensors with a

characteristic curve according to IEC 60947-8 (DIN VDE 0660, Part 303), DIN

44081 and DIN 44082.

Depending on the number of sensors, this will result in the following

tripping and restart temperatures:

Fig. F-2: Typical characteristic curve of a type A sensor (logarithmic scale)

Depending on the number of sensors, the following tripping and restart

temperatures will result based on the TNF (rated response temperature of

the sensor):

Table F-1: Tripping and restart temperatures

The temperatures listed are limit values.

Set the response for the activated thermistor to "Tripping"!

SIMOCODE pro

GWA 4NEB 631 6050-22 DS 03

Safety and commissioning information for EEx areas

Tripping temperature

Restart temperature