Introduction; Important Notes - Siemens Climatix POL871 1/STD Series Basic Documentation


Field of use
Proper use
Electrical installation
Operation
Wiring
Storage and transport
Maintenance
Faults
RoHS
Disposal
4 / 38
Siemens
Smart Infrastructure
1

Introduction

1.1

Important notes

Only authorized personnel is permitted to make diagnostics, to rectify faults and to
restart the plant. This also applies to work carried out within the control panel (e.g.
safety checks or replacement of fuses).
Note is used to emphasize the essential information. Be sure to read it to avoid
incorrect operation.
Cross-references are marked with
or described in details at other locations in this document. In order to keep the
manual lean and show you how topics are interrelated, cross-references are used.
The Climatix HMI-TM products can only be used in the field of heating, ventilation,
air conditioning and refrigeration.
Prerequisites for flawless and safe operation of the Climatix HMI-TM products are
proper transport, installation and commissioning, as well as correct operation.
Fuses, switches, wiring and grounding must comply with local safety regulations for
electrical installations.
The Climatix HMI-TM products can only be operated by personnel who have been
instructed by Siemens Building Technologies or their delegates and whose
attention has been drawn to potential risks.
When wiring the system, high voltage section must be strictly segregated from the
AC 24 V Safety Extra-Low Voltage (SELV) section in order to ensure protection
against electric shock hazard!
Always observe the limits for storage and transport specified in the relevant Data
Sheets.
The Climatix HMI-TM products are maintenance-free, apart from cleaning at
regular intervals. System sections accommodated in the control panel should be
free from dust and dirt whenever normal service visits are conducted.
Should system faults occur and you are not authorized to make diagnostics and
rectify faults, call your service personnel at Siemens Building Technologies.
The materials used in this product comply with 2002/95/EC directive of European
RoHS regulation and ACPEIP directive of China RoHS regulation.
The products contain electrical and electronic components and must not be
disposed of as domestic waste.
The relevant national legal regulations must be complied with and the products
must be disposed of via the appropriate channels. Local and currently valid
legislation must be observed!
Climatix HMI-TM
Introduction

. A topic is closely related to other contents
CB1P3917en_redesigned
2023-06-13