Show Surelink Status And Statistics; Show Surelink Status For All Interfaces; Show Surelink Status For A Specific Interface - Digi IX30 User Manual

Table of Contents

Advertisement

Interfaces

Show Surelink status and statistics

You can show Surelink status for all interfaces, or for an individual interface. You can also show
Surelink status for ipsec tunnels and OpenVPN clients.
Surelink status is only available from the Admin CLI.
  Command line

Show Surelink status for all interfaces

To show the Surelink status all interfaces, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type :
> show surelink interface all
Interface
---------
eth1
eth1
eth2
eth2
modem
modem
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for a specific interface

To show the Surelink status a specific interface, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink interface name name
interface, for example:
> show surelink interface name eth1
Interface
IX30 User Guide
Test
-----------------------------
Interface is up
Interface's DNS servers (DNS)
Interface is up
Interface's DNS servers (DNS)
Interface is up
Interface's DNS servers (DNS)
Test
Show Surelink status and statistics
show surelink interface all
Proto
Last Response
-----
-------------
IPv4
32 seconds
IPv4
28 seconds
IPv4
21 seconds
IPv4
20 seconds
IPv4
115 seconds
IPv4
114 seconds
show surelink interface name name
command to show the Surelink status of a specific
Proto
Last Response
command:
Status
-------
Passing
Passing
Passing
Passing
Passing
Passing
Status
205

Advertisement

Table of Contents
loading

Table of Contents