Configure System Information - Digi IX20-WAG4 User Manual

System administration
Show more detailed system information:
n
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
(541317s)
>

Configure system information

You can configure information related to your IX20 device, such as providing a name and location for
the device.
Configuration items
A name for the device.
n
The name of a contact for the device.
n
IX20 User Guide
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version
Alt. Firmware Build Date : Mon, 13 September 2021 8:04:23
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Load Average
RAM Usage
Temperature
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
Configure system information
: Digi IX20
: IX20-000065
: IX20
: IX20
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 21.8.24.120
: 21.8.24.120
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Mon, 13 September 2021 8:04:23 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds
: 0.01, 0.03, 0.02
: 119.554MB/1878.984MB(6%)
: 40C
: 0.09, 0.10, 0.08
: 127.843MB/1880.421MB(6%)
: 18.421MB/4546.371MB(0%)
: -4523.-46MB/549.304MB(-822%)
: MB/MB(%)
: 0.007MB/256.0MB(0%)
: 1.765MB/256.0MB(1%)
687