Configure System Information - Digi IX20 User Manual

System administration
>
Show more detailed system information:
n
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
IX20 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
(541317s)
>

Configure system information

You can configure information related to your IX20 device, such as providing a name and location for
the device.
IX20 User Guide
Contact
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version
Alt. Firmware Build Date : Fri, Sept 29, 2023 12:10:00
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Load Average
RAM Usage
Temperature
Location
Contact
Disk
----
Disk /etc/config Usage
Disk /var/log_mnt Usage
Disk /opt Usage
Disk /tmp Usage
Disk /var Usage
Configure system information
:
: Digi IX20
: IX20xxxxxxxxyyyyxx
: IX20
: IX20
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 23.9.74.0
: 23.9.74.0
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Fri, Sept 29, 2023 12:10:00 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds
: 0.01, 0.03, 0.02
: 119.554MB/1878.984MB(6%)
: 40C
:
:
: 18.421MB/4546.371MB(0%)
: 0.104MB/14.868MB(1%)
: 215.739MB/458.328MB(50%)
: 0.003MB/120.0MB(0%)
: 0.816MB/32.0MB(3%)
1003