Firewall
12. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Delete captive portals
To delete captive portals:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Captive portals.
4. Click the down caret () next to the appropriate captive portal and select Delete.
5. Click Apply to save the configuration and apply the change.
Command line
TX54 User Guide
Configure captive portals
776