Configuring the White Balance Setting
Procedure
1. Go to More > Settings > Device Settings > White Balance Setting.
2. Select the desired value from the White Balance Mode field and select OK.
Auto (default), it calculates the best white balance setting based on lighting conditions in the room.
•
Indoor
•
Outdoor
•
•
One push
•
ATW, it automatically adjusts the white balance according to the picture taken by the camera.
•
Manual Setting, you can manually adjust the color temperature in the Temperature field.
Adjusting Display Image of the Camera
Procedure
1. Go to More > Settings > Device Settings > Graphics.
2. Select the desired mode from the Display Mode field.
High Definition
•
•
Standard
•
Warm
•
Custom, you can adjust the Saturation, Sharpness, Brightness, and Contrast respectively, and
select the desired mode from the Noise Reduction(2D) field.
Enabling Auto-framing for Camera
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on
all faces in the conference room. All participants in the output screen are covered and the camera can be
automatically adjusted according to the number of participants and the position changes.
About this task
When the auto-framing feature is enabled, you cannot control the camera position.
Procedure
1. Go to More > Settings > Device Settings > Others.
2. Turn on Auto Framing in Framing Mode field.
Enabling Voice-tracking for Camera
Voice-tracking is based on auto-framing, which can automatically focus on the speaker in the meeting.
Procedure
1. Go to More > Settings > Device Settings > Others.
| Camera Settings | 21