Selecting And Setting Cameras; Viewing Camera Status - Yealink MeetingEye 600 Administrator's Manual

• Setting the Camera Presets
• Configuring Preset Synchronize With Active Camera
• Allowing the Remote System to Control Your Camera
• Configuring Multi-Camera Default Layout
• Resetting the Camera

Selecting and Setting Cameras

You can select a camera, enable or disable the selected camera, or customize the camera name. This
feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Camera.
2. Configure and save the following settings:
Parameter
Camera
Status
Camera Name

Viewing Camera Status

About this task
This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Camera Info.
On your VCS, go to More > Settings > System Status > Camera.
•
•
On your CTP20/CTP18, tap
2. You can view the following camera status:
Parameter
Camera Name
Model
IP
Description
Configure the desired camera.
Enable or disable the selected camera.
Default: On.
It is not applicable to MeetingEye 600/
MeetingEye 400/PVT960/PVT940/VC200/
VC200-E/VC500/PVT950.
Customize a name for the camera.
> Settings > System Status > Camera.
Description
Customize a name for the
camera.
The VCS codec model.
The IP address of the selected
camera.
| Configuring Camera Settings | 182
Configuration Method
Web user interface
Web user interface
Web user interface
Configuration Method
Web user interface
Endpoint
Web user interface