Rep 11.15 Feeder Socket; Rep 11.16 550 Sheet Feeder Size Harness Assembly - Xerox DocuPrint N2125 Service Manual

REP 11.15 Feeder Socket

Parts List on PL 3.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Tray.
2. Remove the two screws that secure the Socket to the Feeder in the printer
3. It may be necessary to use a scribe or small screwdriver to lift the locking tabs to discon-
nect P/J71.
4. Disconnect P/J71 from the Socket and remove
Figure 1 Feeder Socket
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 11.15, REP 11.16
WARNING
(Figure
(Figure 1).

REP 11.16 550 Sheet Feeder Size Harness Assembly

Parts List on PL 11.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 550 Sheet Feeder
1). 2. Remove the Tray from the Feeder.
3. Remove the 550 Sheet Feeder Left Cover
4. Remove the two screws that secure the 550 Sheet Feeder Size Harness Assembly to the
550 Sheet Feeder and remove from the wiring harness
5. Remove the Feeder Gear Bracket Assembly
6. Remove the Top Plate (REP
7. Remove the Feeder Drive Assembly
8. Using a small screwdriver push the locking tab that secures the Size Sensor Housing to
the Feeder and remove
9. Disconnect P/J52 from the Size Option PWB and remove the Harness Assembly
3).
Figure 1 Removing Harness Assembly
02/2000
4-88
WARNING
(REP 11.1).
(REP 11.3).
(Figure 1).
(REP 11.4).
11.5).
(REP 11.6).
(Figure 2).
(Figure
Initial Issue
DocuPrint N2125