Cu Analog Outputs Characteristic Value X1 / Cu Ao Char X1; Cu Analog Outputs Characteristic Value Y1 / Cu Ao Char Y1 - Siemens SINAMICS G120X Operating Instructions Manual

Parameters
7.2 Parameter list
Note
When changing p0776, the parameters of the scaling characteristic (p0777, p0778, p0779, p0780) are overwritten with
the following default values:
For p0776 = 0, p0777 is set to 0.0 %, p0778 = 0.0 mA, p0779 = 100.0 % and p0780 to 20.0 mA.
For p0776 = 1, p0777 is set to 0.0 %, p0778 = 0.0 V, p0779 = 100.0 % and p0780 to 10.0 V.
For p0776 = 2, p0777 is set to 0.0 %, p0778 = 4.0 mA, p0779 = 100.0 % and p0780 to 20.0 mA.
X202: IO module terminal
p0777[0...2]

CU analog outputs characteristic value x1 / CU AO char x1

Access level: 2
Can be changed: T, U
Unit group: -
Min:
-1000.00 [%]
Description: Sets the scaling characteristic for the analog outputs.
The scaling characteristic for the analog outputs is defined using 2 points.
This parameter specifies the x coordinate (percentage) of the 1st value pair of the characteristic.
Index: [0] = AO0 (X133 12/13)
[1] = AO1 (X202 85/86)
[2] = AO2 (X202 83/84)
Dependency: See also: p0776
NOTICE
This parameter is automatically overwritten when changing p0776 (type of analog outputs).
Note
The parameters for the characteristic do not have a limiting effect.
X202: IO module terminal
p0778[0...2]

CU analog outputs characteristic value y1 / CU AO char y1

Access level: 2
Can be changed: T, U
Unit group: -
Min:
-20.000 [V]
Description: Sets the scaling characteristic for the analog outputs.
The scaling characteristic for the analog outputs is defined using 2 points.
This parameter specifies the y coordinate (output voltage in V or output current in mA) of the 1st value pair of the
characteristic.
Index: [0] = AO0 (X133 12/13)
[1] = AO1 (X202 85/86)
[2] = AO2 (X202 83/84)
Dependency: The unit of this parameter (V or mA) depends on the analog output type.
See also: p0776
NOTICE
This parameter is automatically overwritten when changing p0776 (type of analog outputs).
Note
The parameters for the characteristic do not have a limiting effect.
X202: IO module terminal
574
Calculated: -
Scaling: -
Unit selection: -
Max:
1000.00 [%]
Calculated: -
Scaling: -
Unit selection: -
Max:
20.000 [V]
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 9572
Factory setting:
0.00 [%]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 9572
Factory setting:
0.000 [V]
SINAMICS G120X converter