Link Object, Instance Number: F6 Hex - Siemens SINAMICS G120X Operating Instructions Manual

No.
3
4
5
6
10
11

Link Object, Instance Number: F6 hex

Supported services
Class
Table 6-38
No.
1
2
3
Table 6-39
No.
1
2
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Service Type Name
get, set UNIT32 Configuration
Control
get UNIT16 Path Size (in
WORDs)
UNIT8 Path
get, set STRING Interface Configu‐
ration
UNIT32
get, set UNIT16 Host Name
STRING
get, set UNIT8 Select ACD
get, set UNIT8 Last Conflict De‐
tected
UNIT8
UNIT8
● Get Attribute all
● Get Attribute single
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Instance Attribute
Service Type Name
get UINT32 Interface Speed
get Interface Flags
Value/explanation
1 hex: Saved values
3 hex: DHCP
Fixed value: 2 hex
20 hex,
F6 hex,
24 hex,
05 hex, where 5 hex is the number of instances of F6
hex (four physical ports plus one internal port).
r61000 Name of Station
r61001 IP address
Host Name Length
local OM flash:
0: Disabled,
1: Enabled
local OM flash ACD Activity
local OM flash Remote MAC
local OM flash ARP PDU
Instance
Name
Revision
Max Instance
Num of Instances
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: halb duplex, 1 duplex
Bit 3 ... 5: Automatic state identification
Bit 6: Reset required
Bit 7: Local hardware fault (0 = ok)
Advanced commissioning
6.3 Drive control
● Get Attribute all
● Get Attribute single
● Set Attribute single
237