Function description
Procedure
4. Switch off the converter power supply.
5. Wait until all converter LEDs are dark.
6. Switch on the converter power supply again. Your settings become active after switching on.
You have transferred the settings to the converter.
❒
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
1. In the "OPTIONS" menu, select "FROM BOP".
2. Start data transfer with OK.
3. Wait until the oonverter has written the settings to the memory card.
Saving the settings and series commissioning
8.2 Operator panel
947