A Parameter Cannot Be Changed; When Cannot You Change A Parameter? - Siemens SINAMICS G120X Operating Instructions Manual

Commissioning
5.6 Handling the BOP-2 operator panel
5.6.4

A parameter cannot be changed

When cannot you change a parameter?

The converter indicates why it currently does not permit a parameter to be changed:
Read parameters cannot
For each parameter, the parameter list contains the operating state in which the parameter can
be changed.
178
The parameter can only be adjusted
be adjusted during quick commissioning.
A parameter can only be adjusted
when the motor is switched off
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
SINAMICS G120X converter