Table of Contents
Advertisement
6.3.2.3
Digital outputs
Function description
1)
To change the function of a digital output, you must interconnect the digital output with a
binector output of your choice.
Binector outputs are designated in the parameter list with the prefix "BO".
Example
To output converter fault messages via digital output DO 1, you must interconnect DO 1 with
these fault messages.
Set p0731 = 52.3
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
with I/O Extension Module
Advanced commissioning
6.3 Drive control
193
Advertisement
Table of Contents
