Table of Contents
Advertisement
Parameters
7.2 Parameter list
Note
For bit 02:
A data set changeover is delayed by the time required for the internal parameter calculation.
For bit 04:
A data set changeover is only carried out when the armature short circuit is not activated.
For bit 05:
A data set changeover is only carried out when pole position identification is not running.
For bit 07:
A data set changeover is only carried out when rotating measurement is not running.
For bit 08:
A data set changeover is only carried out when motor data identification is not running.
r0836.0...1
CO/BO: Command Data Set CDS selected / CDS selected
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the command data set (CDS) selected via the binector input.
Bit field:
Bit
00
01
Dependency:
See also: r0050, p0810, p0811
Note
Command data sets are selected via binector input p0810 and following.
The currently effective command data set is displayed in r0050.
r0837.0...1
CO/BO: Drive Data Set DDS selected / DDS selected
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the drive data set (DDS) selected via the binector input.
Bit field:
Bit
00
01
Dependency:
See also: r0051, p0820, p0821
Note
Drive data sets are selected via binector input p0820 and following.
The currently effective drive data set is displayed in r0051.
If there is only one data set, then a value of 0 is displayed in this parameter and not the selection via binector inputs.
586
Signal name
CDS selection bit 0
CDS selection bit 1
Signal name
DDS selection bit 0
DDS selection bit 1
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
ON
ON
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
ON
ON
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: Unsigned8
Dynamic index: -
Function diagram: 8560
Factory setting:
-
0 signal
FP
OFF
-
OFF
-
Data type: Unsigned8
Dynamic index: -
Function diagram: 8565
Factory setting:
-
0 signal
FP
OFF
-
OFF
-
SINAMICS G120X converter
Advertisement
Table of Contents
