NOTICE
Damage when the 24V output voltage is short-circuited
If the following conditions occur simultaneously, the Control Unit with PROFINET interface
can be damaged:
1. The converter is operational.
2. The 24V output voltage develops a short-circuit at terminal 9.
3. The ambient temperature reaches the maximum permissible value.
4. The external 24V power supply voltage at terminals 31 and 32 reaches the maximum
● Ensure that not all of these conditions are simultaneously satisfied.
4.2.4
Terminals strips for I/O Extension Module
Wiring I/O Extension Module
The optional I/O Extension Module expands the number of G120X I/O terminals. See the
following for the wiring diagram of the I/O Extension Module:
The following diagram shows you how to connect the digital inputs and digital outputs of the I/
O Extension Module with an external power supply.
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
permissible value.
Wiring
4.2 Control interfaces
103