Motor Data Object, Instance Number 28 Hex - Siemens SINAMICS G120X Operating Instructions Manual

Advanced commissioning
6.3 Drive control

Motor Data Object, Instance Number 28 hex

Supported services
Class
Table 6-26
No
.
1
2
3
Table 6-27
No
.
3
6
7
8
9
10
11
12
13
14
15
230
● Get Attribute single
Class Attribute
Serv‐ Type Name
ice
get UINT16 Revision
get UINT16 Max Instance
get UINT16 Num of Instances
Instance Attribute
Service Type Name
get, set USINT Motor Type
get, set UINT16 Rated Current
get, set UINT16 Rated Voltage
get, set UINT32 Rated Power
get, set UINT16 Rated Frequency
get, set UINT16 Rated Tempera‐
ture
get, set UINT16 Max Speed
get, set UINT16 Pole Count
get, set UINT32 Torque Constant
get, set UINT32 Inertia
get, set UINT16 Base Speed
Instance ● Get Attribute single
● Set Attribute single
Value/explanation
p0300 motor type, see the following table
p0305 rated motor current
p0304 rated motor voltage
p0307 rated motor power
p0310 rated motor frequency
p0605 motor temperature threshold
p0322 maximum motor speed
p0314 value of p0314*2
p0316 motor torque constant
p0341 motor moment of inertia
p0311 motor rated speed
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
SINAMICS G120X converter