Ci: Esm Setpoint Technology Controller / Esm Setp Tech_Ctrl; Esm Number Of Activations/Faults / Esm Act/Fault Qty; Esm Reset Number Of Activations/Faults / Esm Act/F Qty R; Co/Bo: Esm Status Word / Esm Zsw - Siemens SINAMICS G120X Operating Instructions Manual

p3884

CI: ESM setpoint technology controller / ESM setp tech_ctrl

Access level: 3
Can be changed: T, U
Unit group: -
Min:
-
Description: Sets the signal source for the setpoint for p3881 = 4 (technology controller) in the essential service mode (ESM).
Dependency: See also: p3881
Note
ESM: Essential Service Mode
For p3884 = 0:
The technology controller uses the setpoint from p2253.
r3887[0...1]

ESM number of activations/faults / ESM act/fault qty

Access level: 4
Can be changed: -
Unit group: -
Min:
-
Description: Displays the number of activations and faults that have occurred for the essential service mode (ESM).
Index: [0] = Activation of the essential service mode
[1] = Faults during the essential service mode
Dependency: See also: p3888
Note
ESM: Essential Service Mode
p3888

ESM reset number of activations/faults / ESM act/F qty r

Access level: 4
Can be changed: T
Unit group: -
Min:
0
Description: Setting to reset the number of activations and faults that have occurred for the essential service mode (ESM).
1: counter reset active (r3887[0, 1])
0: inactive
Dependency: See also: r3887
Note
ESM: Essential Service Mode
The parameter is automatically reset to zero after the counter has been reset.
r3889.0...10

CO/BO: ESM status word / ESM ZSW

Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description: Display and BICO output for the status word of the essential service mode (ESM).
Bit field: Bit
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Signal name
Calculated: -
Scaling: PERCENT
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
1
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Parameters
7.2 Parameter list
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: -
Function diagram: 7033
Factory setting:
0
Data type: Unsigned16
Dynamic index: -
Function diagram: 7033
Factory setting:
-
Data type: Unsigned8
Dynamic index: -
Function diagram: 7033
Factory setting:
0
Data type: Unsigned32
Dynamic index: -
Function diagram: 7033
Factory setting:
-
0 signal FP
845