Drive Control Via Modbus Rtu; Activating Communication Via Fieldbus - Siemens SINAMICS G120X Operating Instructions Manual

Infrastructure converter for hvac/water/wastewater

Hide thumbs Also See for SINAMICS G120X:

Table of Contents

Advanced commissioning

6.3 Drive control

Drive control via Modbus RTU

Function description

Proceed as follows to activate communication via Modbus RTU:

1. Start quick commissioning.

2. In the first steps of the quick commissioning, confirm all of the values that have already been

3. Select one of the following default settings:

– 51: "Modbus RTU control"

– 52: "Modbus RTU control local/remote"

Default setting of the interfaces (macros) (Page 107)

Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC

SINAMICS G120X converter