Siemens SINAMICS G120X Operating Instructions Manual page 240

Infrastructure converter for hvac/water/wastewater
Hide thumbs Also See for SINAMICS G120X:
Table of Contents

Advertisement

Advanced commissioning
6.3 Drive control
No.
3
4
5
6
10
238
Service
Type
Name
get
ARRAY
Physical Address r8935 Ethernet MAC address
get_and_
Struct of
Interface Coun‐
clear
ters
UINT32
In Octets
UINT32
In Ucast Packets
UINT32
In NUcast Pack‐
ets
UINT32
In Discards
UINT32
In Errors
UINT32
In Unknown Pro‐
tos
UINT32
Out Octets
UINT32
Out Ucast Pack‐
ets
UINT32
Out NUcast pack‐
ets
UINT32
Out Discards
UINT32
Out Errors
get_and_
Struct of
Media Counters
clear
UINT32
Alignment Errors
UINT32
FCS Errors
UINT32
Single Collisions
UINT32
Multiple Colli‐
sions
UINT32
SQE Test Errors
UINT32
Deferred Trans‐
missions
UINT32
Late Collisions
UINT32
Excessive Colli‐
sions
UINT32
MAC Transmit Er‐
rors
UINT32
Carrier Sense Er‐
rors
UINT32
Frame Too Long
UINT32
MAC Receive Er‐
rors
get, set
Struct of
Interface Control
UINT16
Control Bits
UINT16
Forced Interface
Speed
get
String
Interface_Label
Value/explanation
Optional, required if the "Media Counters Attribute" is
implemented.
Received octets
Received Unicast packets
Received non-Unicast packets
Incoming packets, not processed
Incoming packets with errors
Incoming packets with unknown protocol
Sent octets
Sent Unicast packets
Sent non-Unicast packets
Outgoing packets, not processed
Outgoing packets, with errors
Media-specific counters
Structure received, which does not match the num‐
ber of octets
Structure received, which does not pass the FCS
check
Structure successfully transmitted, precisely one col‐
lision
Structure successfully transmitted, several collisions
Number of SQE errors
First transmission attempt delayed
Number of collisions that occurred delayed by 512 bit
timers to the request
Transmission unsuccessful as a result of intensive
collisions
Transmission unsuccessful as a result of an internal
MAC sublayer transmission error.
Times that the carrier sense condition was lost or
never asserted when attempting to transmit a frame
Structure too large
Transmission unsuccessful as a result of an internal
MAC sublayer receive error.
Interface-Label
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
SINAMICS G120X converter

Advertisement

Table of Contents
loading

Table of Contents