Removing The Connection Cover, Fsd/Fse; Removing The Connection Cover And Making Openings, Fsf/Fsg - Siemens SINAMICS G120X Operating Instructions Manual

Wiring
4.1 Line supply and motor
Connecting converters, FSD ... FSG
You must remove the connection cover from the converter in order to connect the line supply
and motor to the converter.
● For FSD/FSE, remove the connection cover as shown below:
Figure 4-8
● For FSF/FSG, remove the two screws from the cover and then remove it. In addition, you
must make openings on the connection cover for the line supply and power cables. Use side
cutters or a fine saw blade.
Figure 4-9
After the cables are connected, you must re-attach the cover in order to re-establish the touch
protection of the converter.
90
1

Removing the connection cover, FSD/FSE

1

Removing the connection cover and making openings, FSF/FSG

2
2
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
3
SINAMICS G120X converter