Siemens SINAMICS G120X Operating Instructions Manual page 1073

Infrastructure converter for hvac/water/wastewater

Hide thumbs Also See for SINAMICS G120X:

Table of Contents

7. Remove the lower copper bar (TX-25).

8. Remove the connector of the current sensor.

9. Remove the current sensor (TX-20).

The current sensor is removed.

Installing the current sensor

1. Mount the current sensor.

2. Plug the connector of the current sensor.

3. Mount the lower copper bar (TX-25).

4. Mount the upper copper bar (TX30 and TX25).

5. Mount the IP20 cover.

SINAMICS G120X converter

Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC

Corrective maintenance

10.2 Replacing spare parts