Table of Contents
Advertisement
Note
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
For p8806[0...31]:
System identifier.
For p8806[32...53]:
Location identifier.
p8807[0...15]
Identification and Maintenance 2 / I&M 2
G120X_PN
Access level: 3
Can be changed: T, U
Unit group: -
Min:
-
Description:
Parameters for the PROFINET data set "Identification and Maintenance 2" (I&M 2).
This information is known as "Installation date".
Dependency:
See also: p8806, p8808
Note
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
For p8807[0...15]:
Dates of installation or first commissioning of the device with the following format options (ASCII):
YYYY-MM-DD
or
YYYY-MM-DD hh:mm
- YYYY: year
- MM: month 01 ... 12
- DD: day 01 ... 31
- hh: hours 00 ... 23
- mm: minutes 00 ... 59
Separators must be placed between the individual data, i.e. a hyphen '-', space ' ' and colon ':'.
p8808[0...53]
Identification and Maintenance 3 / I&M 3
G120X_PN
Access level: 3
Can be changed: T, U
Unit group: -
Min:
-
Description:
Parameters for the PROFINET data set "Identification and Maintenance 3" (I&M 3).
This information is known as "Supplementary information".
Dependency:
See also: p8806, p8807
NOTICE
Only characters belonging to the standard ASCII character set may be used (32 dec to 126 dec).
Note
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
For p8808[0...53]:
Any supplementary information and comments (ASCII).
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Parameters
7.2 Parameter list
Data type: Unsigned8
Dynamic index: -
Function diagram: -
Factory setting:
Data type: Unsigned8
Dynamic index: -
Function diagram: -
Factory setting:
879
Advertisement
Table of Contents
