Table of Contents
Advertisement
1:
Dependency:
See also: r3996
NOTICE
The parameter value is not reset when the factory setting is restored (see p0010 = 30, p0970).
When the power unit use is changed, short-term communication interruptions may occur.
Note
When the parameter is changed, all of the motor parameters (p0305 ... p0311), the technological application (p0500)
and the control mode (p1300) are pre-assigned according to the selected application. The parameter has no influence
when calculating the thermal overload.
p0205 can only be changed to the settings that are saved in the power unit EEPROM.
r0206[0...4]
Rated power unit power / PU P_rated
Access level: 2
Can be changed: -
Unit group: 14_6
Min:
- [kW]
Description:
Displays the rated power unit power for various load duty cycles.
Index:
[0] = Rated value
[1] = Load duty cycle with low overload
[2] = Load duty cycle with high overload
[3] = S1 cont duty cyc
[4] = S6 load duty cycle
Dependency:
IECdrives (p0100 = 0): Units kW
NEMA drives (p0100 = 1): Units hp
See also: p0100, p0205
r0207[0...4]
Rated power unit current / PU PI_rated
Access level: 3
Can be changed: -
Unit group: -
Min:
- [Arms]
Description:
Displays the rated power unit power for various load duty cycles.
Index:
[0] = Rated value
[1] = Load duty cycle with low overload
[2] = Load duty cycle with high overload
[3] = S1 cont duty cyc
[4] = S6 load duty cycle
Dependency:
See also: p0205
r0207[0...4]
Rated power unit current / PU PI_rated
G120X_DP (PM330),
Access level: 3
G120X_PN (PM330),
Can be changed: -
G120X_USS (PM330)
Unit group: -
Min:
- [Arms]
Description:
Displays the rated power unit power for various load duty cycles.
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Load duty cycle with low overload for vector drives
Calculated: -
Scaling: -
Unit selection: p0100
Max:
- [kW]
Calculated: -
Scaling: -
Unit selection: -
Max:
- [Arms]
Calculated: -
Scaling: -
Unit selection: -
Max:
- [Arms]
Parameters
7.2 Parameter list
Data type: FloatingPoint32
Dynamic index: -
Function diagram: -
Factory setting:
- [kW]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 8021
Factory setting:
- [Arms]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 8021
Factory setting:
- [Arms]
503
Advertisement
Table of Contents
