Field Bus Interface Protocol Selection / Field Bus Protocol - Siemens SINAMICS G120X Operating Instructions Manual

Index: [0] = Number of error-free telegrams
[1] = Number of rejected telegrams
[2] = Number of framing errors
[3] = Number of overrun errors
[4] = Number of parity errors
[5] = Number of starting character errors
[6] = Number of checksum errors
[7] = Number of length errors
p2030

Field bus interface protocol selection / Field bus protocol

G120X_DP Access level: 1
Can be changed: T
Unit group: -
Min:
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
3:
Note
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p2030 Field bus interface protocol selection / Field bus protocol
G120X_PN Access level: 1
Can be changed: T
Unit group: -
Min:
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
7:
10:
Note
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p2030 Field bus interface protocol selection / Field bus protocol
G120X_USS Access level: 1
Can be changed: T
Unit group: -
Min:
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
1:
2:
5:
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
No protocol
PROFIBUS
No protocol
PROFINET
EtherNet/IP
No protocol
USS
Modbus RTU
BACnet MS/TP
Calculated: -
Scaling: -
Unit selection: -
Max:
3
Calculated: -
Scaling: -
Unit selection: -
Max:
10
Calculated: -
Scaling: -
Unit selection: -
Max:
5
Parameters
7.2 Parameter list
Data type: Integer16
Dynamic index: -
Function diagram: 9310
Factory setting:
3
Data type: Integer16
Dynamic index: -
Function diagram: 9310
Factory setting:
7
Data type: Integer16
Dynamic index: -
Function diagram: 9310
Factory setting:
0
741