Removing And Installing Ignition Coils With Output Stage - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
❑ 30 Nm
9 - O-ring
❑ replace after removal
10 - Hall sender - G40-
❑ Removing and installing
11 - Screw
❑ 9 Nm
12 - O-ring
❑ replace after removal
13 - Engine speed sender - G28-
❑ Check O-ring for damage
❑ Removing and installing
14 - Screw
❑ replace after removal
❑ 9 Nm
1.2 Removing and installing ignition coils
with output stage
Special tools and workshop equipment required
♦ Extractor -T10530-
Removing:
– Remove engine cover
– Unlock and disconnect all connectors from ignition coils.
– Unscrew screw for ignition coil to be removed.
– Press extractor -T10530- into the bore of the ignition coil -1-
as far as the stop.
– Tighten nuts -2- in -direction of arrow-.
342
Rep. gr.28 - Ignition system
⇒ page 344
⇒ page 344
⇒ page 10 .