Removing And Installing Coolant Recirculation Pump V51 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Unscrew screws -1...4- and remove coolant pump from the
positioning element for engine temperature control - N493- .
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
– Insert coolant pump and make sure it is fitted correctly
-arrows-.
– At the same time, make sure the gasket -3- is fitted correctly.
– Fit on the toothed belt and tighten screws for the coolant pump
⇒ page 190 .
– If a new coolant pump was fitted, remove the protective cap
-1-.
– Replenish coolant ⇒ page 182
2.7 Removing and installing coolant recircu‐
lation pump - V51-
Special tools and workshop equipment required
♦ Hose clamps up to 25 mm - 3094-
♦ Hose binding claw - VAS 6340-
♦ Hose binding claw - VAS 6362-
196
Rep. gr.19 - Cooling
.