Skoda Octavia III 2013 Workshop Manual page 339

– Press the engine/gearbox unit in the driving direction to the
front a little and remove from the propshaft from the angle
gearbox.
Caution
Risk of damage to the gasket ring -arrow -on the flange of the
propshaft.
Push propshaft horizontally as far back and towards the left
vehicle side as possible.
Note
In case of damaged gasket ring the propshaft must be replaced.
Continued for all vehicles
– Remove bolts -arrows-.
– Remove plug connection from holder, disconnect and expose
lambda probe electric cable.
– Loosen the clamping sleeve -arrow- and slide it backwards.
– Remove pre-exhaust pipe with catalytic converter towards the
rear.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
1. Removing and installing parts of the exhaust system
331