Skoda Octavia III 2013 Workshop Manual page 252

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
♦ Remote control , e.g. -V.A.G 1348/3A- with adapter cable , e.g.
-V.A.G 1348/3-3 -
♦ Auxiliary measuring set - V.A.G 1594/C-
♦ Handheld multimeter - V.A.G 1526C-
♦ Disassembly wedge - 3409-
♦ Measuring vessel
1.12.1 Checking fuel pressure
Note
♦ Safety precautions when working on the fuel supply system
⇒ page 2 .
Rules of cleanliness when working on the fuel supply system
♦
⇒ page 9 .
Test conditions when working on the fuel supply system
♦
⇒ page 4 .
– Remove high pressure pipe -2-
– Connect pressure tester - VAS 6550- to fuel supply line with
adapter - VAS 6550/2- .
– Connect hose line - VAS 6550/1- and keep in the fuel-resistant
measuring vessel.
Caution
Risk of fuel dripping out.
♦ Make sure that the shut-off tap -C- is closed.
♦ Lever points in the direction of flow.
– Open shut-off taps -A and B-.
– Switch on ignition until bubble-free fuel flows out.
– Close shut-off tap -B- to will build fuel pressure.
– Read off fuel pressure on pressure gauge.
• Specified value: 0.35...0.7 MPa (3.5...7 bar)
If the specification is not attained:
– Perform fuel delivery quantity check
244
Rep. gr.20 - Fuel supply system
⇒ page 250 .
⇒ page 246 .