Skoda Octavia III 2013 Workshop Manual page 216

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Unclip and remove the coolant hoses -arrows- with hose
clamps up to 25 mm - 3094- .
– Loosen hose clamps arrows and remove coolant hoses.
– Release screw -1- and remove top coolant pump.
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
• Tightening torques ⇒ page 205
Note
Secure all hose connections with hose clamps which comply with
the series design ETKA - ⇒ Electronic Catalogue of Original
Parts .
– Check coolant level
208
Rep. gr.19 - Cooling
⇒ page 183 .