Skoda Octavia III 2013 Workshop Manual page 22

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Raise holding clamp -arrow- and remove top right coolant
hose from radiator.
Note
For the following spring clip unclipping procedure use the removal
tool for inner door trim panel - MP8-602/1- .
– Remove plug -1- at the engine control unit - J623- ⇒ Electrical
System; Rep. gr. 24 .
– Take electrical plug connections -2, 3- out of the holder and
disconnect.
– Expose electric cable harness.
– Unlock catches -arrows- and remove cover -1- for E-box in the
engine compartment.
– Unlock catch with a screwdriver -arrow- and pull cover for E-
box -1- upwards.
14
Rep. gr.10 - Removing and installing engine