Skoda Octavia III 2013 Workshop Manual page 96

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
Cover with 15 screws
♦ Thickness of sealant bead: 2 ... 3 mm
Note
The bottom cover for the timing chain must be installed within
♦
5 minutes after applying the sealant.
The sealant bead must not be thicker than specified otherwise
♦
excess sealant may get into the oil pan and clog the strainer
in the oil suction pipe.
Tightening sequence for bottom cover for timing chain with 8
screws
– Tighten new screws -1 to 8- in 2 stages in the sequence as
shown:
– 1. Tighten screws to 8 Nm.
– 2. 45° (torque a further 45° (
Tightening sequence for bottom cover for timing chain with 15
screws
– Tighten new screws -1 to 15- in 2 stages in the sequence as
shown:
– 1. Tighten screws to 8 Nm.
– 2. 45° (torque a further 45° (
Note
Let sealing compound dry for approx. 30 minutes after installing
cover. Only then fill with engine oil.
Further installation occurs in reverse order. However, pay atten‐
tion to the following:
– Install tensioner pulley for V-ribbed belt
– Adjust the assembly bracket
– Fill engine oil ⇒ Maintenance ; Booklet Octavia III .
88
Rep. gr.15 - Cylinder head, valve gear
1
/ 8 turn).
1
/ 8 turn).
⇒ page 47 .
⇒ page 41 .