Removing And Installing Top Coolant Pipe - Skoda Octavia III 2013 Workshop Manual

– Unclip and remove the coolant hoses -1, 2- with hose clamps
up to 25 mm - 3094- .
– Loosen hose clamps arrows and remove coolant hoses.
– Release screws -arrows- and remove coolant pump at the
front.
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
• Tightening torques ⇒ page 205
Note
Secure all hose connections with hose clamps which comply with
the series design ETKA - ⇒ Electronic Catalogue of Original
Parts .
– Check coolant level
3.3 Removing and installing top coolant
pipe
Special tools and workshop equipment required
♦ Hose clamps up to 25 mm - 3094-
♦ Hose binding claw - VAS 6362-
Removing
– Remove ignition coil for cylinder 3
– Unlock latches -arrows- and remove wiring -1- from mounting
bracket.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 183 .
⇒ page 342
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
207
3. Coolant pipes