– Unclip the cable guide -1- and push it lightly to the side.
– Unscrew nuts -arrow-, undo earth strap.
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
50 .
– Remove engine cover
– Release the catch -arrow-, remove engine trim panel mount
-1-.
– Remove caps of the screw connections of the front suspension
strut dome.
– Fit adapter - MP9-200/18 - with hook - MP9-200/10 - onto the
support bracket - T30099- with the support - 10-222A/31- .
– Attach the supporting device - T30099- with support -
10-222A/31- and base - T30119- to the screw fittings of the
suspension strut dome as shown.
– Uniformly pre-tension the engine/gearbox unit with spindles,
but do not raise.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 10
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
39
3. Assembly bracket