Skoda Octavia III 2013 Workshop Manual page 218

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
11 - Condenser
❑ removing and installing ⇒ Air conditioning; Rep. gr. 87
12 - Rubber bush
❑ for charge air cooler
13 - O-ring
❑ Replace after disassembly
❑ Moisten with coolant
14 - Retaining clip
❑ for coolant temperature sender at radiator outlet - G83-
Connect coolant hose with quick coupling
– Remove old O-ring -2- in coolant hose -3-.
– Moisten new O-ring with coolant and insert into coolant hose.
– Press coolant hose onto coolant pipe -1- until there is an au‐
dible click.
– Press coolant hose down again and check by pulling that the
plug-in connector is fully engaged.
210
Rep. gr.19 - Cooling