Skoda Octavia III 2013 Workshop Manual page 272

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Remove pre-exhaust pipe with catalytic converter
⇒ page 328 .
– Remove air filter housing
– Remove lambda probe - G39-
– Loosen hose clamp -2-.
– Unscrew the screw -1- and press the left-hand air guide pipe
to the left with light force and remove from the exhaust gas
turbocharger.
– Detach coolant hose -arrow-.
– Disconnect plugs -1 and 2-.
– Open mounting bracket-3-.
– Undo the screw -1- or earth strap, remove the connector
-arrows- and place the entire wire harness to one side.
– Loosen hose clamp -2- and remove coolant hose.
– Unlock the catch -arrow- and remove the cable shaft -4- from
the bracket upwards.
– Remove the screws -1, 2, 3- and tilt the coolant pipe to one
side.
264
Rep. gr.21 - Turbocharging/supercharging
⇒ page 288 .
⇒ page 319 .